[Brent Norman]

Thanks Greg, that did it exactly to what we needed.

thanks for your support.

[Brent Norman]

I understand what the top clearance setting (3/32″) is doing to the door panel. But this is the look I am trying to achieve – I did it by setting the bottom clearance to 1 1/8″. If I want a 38″ cabinet it looks like the only way is to set the cabinet height to 39 1/8″ and make the bottom clearance 1 1/8″.

Attachments:

You must be logged in to view attached files.

[Brent Norman]

What I mean is when I have the upper to 38″ I would like the cabinet box to be 38″, not 36 7/8″ as shown in this screen grab. I understand the Top Clearance setting. Basically the cabinets and doors and end panels to be the same height.

Attachments:

You must be logged in to view attached files.

[Brent Norman]

yes thanks, I’ve been reviewing Joe’s tutorials. I’ve gone through most of the Sketchup basics as well. The one thing I couldn’t get to work was trying to punch out a door space from the CabWriter wall. I can’t seem to make the push pull work. I can do a cut out using push-pulls with the Sketchup rectangles if I use that to draw walls but haven’t been successful to make the void if I use the wall tool. Any ideas on what I could be doing wrong, I would appreciate it.

[Brent Norman]

thanks Greg, I am going through the training models and am sure I’ll get there. I am pretty proficient with other CAD programs such as Vectorworks and AutoCAD but am looking forward to getting proficient with your software.

[Author]

Posts