[lesdt]

Looking good!
Yes there would always be mid rails between drawers.

Les

[lesdt]

Hi Joe,
1. Yes that is correct with a lower face frame.
2. Sometimes we would use mid rail between 2 doors on one opening but that could be drawn in easily like you say.

3. That is correct also. We mount the hinge on the stile and door.
I can’t think of anything else right now but will post as I do.
Thanks, Les

[lesdt]

I do make doors so it would be very helpful from that side but also would be beneficial to easily visually show a client what the 1/2 overlay looks like compared to inset.

Thanks, Les

[lesdt]

Hi- I’m sure hoping too that 1/2 overlay will be included before too long. I would help immensely.

Thanks, Les

[lesdt]

Looks lovely. Can’t wait to try it!

Les

[lesdt]

Hi Joe- The upper cabinet is some shallower then the base. I’m drawing it the way you say as an upper on the base, but I thought there would surely be a more efficient way the to draw all the extras in manually. I think the divided upper cabinet would do the trick beautifully! Like the old style Hoosiers. That’s a good example. I used to build panels for Hoosier cupboards.

Thanks, Les

[lesdt]

Guess I can’t send a skb. file. Here are 2 screen shots.

Thanks, Les

Attachments:

You must be logged in to view attached files.

[lesdt]

Hi Greg- I’ve attached a cabinet with the toe kick notch the way we build.

Thanks, Les

[lesdt]

I would also like if the finished ends could be drawn to go to the floor. We don’t usually use ladder base and have the applied end panels go all the way to the floor with a notch cut out of the side for the toe kick.

Thanks, Les

[lesdt]

How do you draw an angled corner to spec? I’ve experimented a bit, and having a hard time getting the placement and sizing to come out like I’d like. That’s why I was wondering if a step by step video showing the process and the different options available could be helpful. In one of your videos you show an upper angled corner drawn with the next cabinet. Does this help a bit?
I didn’t look thru the settings but the base corner I drew doesn’t show the ladder base.

Thanks, Les

[lesdt]

I’m mostly interested in face frame corner cabinets.
The videos that I’ve watched so far are pretty fuzzy. Can that be helped?

Thanks, Les

[Author]

Posts