[bfodrovics]

Hi Greg,
I always use a combination of flush toe and toe kick on a kitchen. Specially flush toe and baseboard on islands. The attached wall was a bunch of cabinets together, just for feedback. I just want to show different combinations and different connections between cabinets.
Please see the attached SKP. of the same wall with toe kick.
feedback3a
Next week I will add some of our frameless construction, and dado constructions as time permits. Hopefully this help improve the software.
Thank you,
Bela

[bfodrovics]

Great new interface for project settings in CabWriter. The first problem I could not find a solution for in the new interface, is for the base cabinets construction. When you show a bottom rail the floor of the cabinet should be flush with the top of the bottom rail of the cabinet. I am not sure if I am missing a setting. Please advise.
I am also attaching for feedback a wall with face frame cabinets, the way we build them. This is a flush toe,
no dado construction. The model was done on cabinet vision and exported to Sketchup.feedback3
Thank you,
Bela

[bfodrovics]

My big request is the bottom rail on base cabinets should be setup as default. I’ve seen face frame base cabinets without a bottom rail maybe 2 times in 20 years.
I have attached our simple Face Frame one door base cabinet no dado and toe kick construction for feedback.
https://www.dropbox.com/s/syw31sjon6nlks1/feedback%202.skp?dl=0
Thank you
Bela

[Author]

Posts