[chiefwoodworker]

Hi Cory,

I will look into this later today. If you haven’t heard back from me by tomorrow morning please drop me an email at [email protected]. Thanks.

Joe…..

[chiefwoodworker]

Hi Jeremy,

Could you give us a link to your cut list ao that we can see what you are seeing?

Joe….

[chiefwoodworker]

You have to go to the CutList Bridge Setup tab and set it up that way. Have you done that?

Joe….

[chiefwoodworker]

Hi Jeremy,

The CabWriter cut list and CutList Bridge already do all that. The Thick, Width and Length columns show the oversize dimensions. The Fin T, Fin W and Fin L show the finished dimensions. The Info column’s display can be one of three selections. The usual on is just the letters L, W and T indicating that the part has been oversized in the Length, Width or Thickness dimension respectively. The second choice places a negative or positive number in parenthesis after the letters indicating how much a part has been oversized or undersized. Lastly the third choice is to have the number in parenthesis after a letter show the oversized/undersized dimension.

If you have further questions write me at [email protected].

Joe….

[chiefwoodworker]

You are welcome and I am glad you leaned a few things too. Let us know if you need help in the future.

Joe….

[chiefwoodworker]

Hi Don,

I have written to Jack asking him to write me and set up a Zoom meeting. I haven’t heard back from him yet. I will ask the same of you. Write me at [email protected] and we can set up a Zoom meeting to resolve the issue. In the mean time you might check our website to see if you are up to date with CabWriter 6.0.5. We have made several changes recently to solve problems that were a result of the recent SketchUp 2023 release.

Joe…..

[chiefwoodworker]

Hi Dan,

I need to look at your .skp file, which you were apparently unable to upload here. You might try either crating a IP file and uploading it here, or creating a ZIP file and uploading it to something like Dropbox and emailing the link to me at [email protected] .

Joe…..

[chiefwoodworker]

Hi Mark,

I haven’t seen the file in my email yet. Did you send me a link to [email protected] ?

Joe…..

[chiefwoodworker]

Hi Mark,

I couldn’t download your model. Apparently it was too large. Could you please send me a link to a download at my email address [email protected] ? I will look at it probably tomorrow afternoon (I will be on the road in the morning).

Thanks,
Joe……

[chiefwoodworker]

Hi Jeffrey,
Could you please send me a link to your model so that I can try to recreate the problem here? Send it to [email protected]. Thanks.

p.s.Template is attached.

Attachments:

You must be logged in to view attached files.

[chiefwoodworker]

Hi Michael,

Excellent suggestion. We should have thought of that in CabWriter I!. I won’t definitely commit to it at this moment; I need to look at the difficulty first. But I suspect that change will be a minor cost in effort. Thanks,

Joe…..

[chiefwoodworker]

Hi Zack,

Please send me a link to your model. It appears that no material attributes have been assigned to your components. I suspect it has to do with your material list. It may be missing.

Joe….

[chiefwoodworker]

Hi Michael,

Try the installation file in the link below and let me know if that solves the problem.

https://www.dropbox.com/sh/bdicfqdf5y2me1c/AAD6lY09gCoR7tkAmi70DYUea?dl=0

Joe…..

[chiefwoodworker]

Thanks Mike,

I am looking into it.

Joe…..

[chiefwoodworker]

Hi Michael,

I wrote this extension with woodworkers and cabinetmakers in mind. They don’t usually use Fog. So at the moment there is no way to change this. However, let me look at what it would take to provide an option to permit it and perhaps make a new release. I’ll get back to you.

Joe….

[Author]

Posts